Technical specifications

Liva

Wall-hung · Electric

For those who
love numbers.

Ceramic & construction

Pan dimensions (L × W × H)
600 × 370 × 360 mmPan height excludes the gap below the installed pan.
Net weight
39 kg
Bowl shape
U-shape, elongated
Finishes
White, Gray, Gold
Ceramic glaze
Antibacterial
Trapway glazing
Fully glazed

Material performance

Ceramic propertyI.S.I. requirementOur value
Water absorption0.50%<0.20%
Breaking strength600 kg/cm²650–700 kg/cm²
Crazing resistanceTest condition: steam pressure of 3.7 kg/cm² for four hours.No crazing up to two cyclesNo crazing up to four cycles
Minimum thickness6 mm at any place7 mm at any place
WarpageShould not exceed the specified limitsWithin permissible limits
Minimum glaze thicknessNot specified400 microns / 0.4 mm
Surface qualityNo wavy finish on the visible surfaceNo wavy finish
DiscolourationNone on the visible surfaceNone on the visible surface
Chemical resistanceShould be resistant to all household chemicalsPasses
Stain and burn resistanceNo stain should remain on testingPasses

Plumbing & installation

Mounting
Wall-hung ceramic body
Flush tank
Integrated within the ceramic body
Outlet
P-trap · horizontal wall outlet
Rough-in distance
180 mm
Installed seat height
Set by mounting height at installationThe 340 mm measurement belongs to the ceramic body; it is not the finished-floor-to-seat height.
Support
Concealed in-wall carrier frame on a load-bearing wall
Water inlet
1/2 in (G1/2, DN15)Angle-valve inlet and hose.
Minimum water pressure
0.12 MPa dynamicMeasured while water flows, at the WC point.
Required flow
Greater than 20 L/min
Flush system
Tornado dual flush
Flush volume
2.8 L half / 4.6 L full

Electrical & power

Power supply
220–240 V · 50 Hz
Rated input
1150 W
Plug
Earthed Type DIndian 3-pin.
Standby consumption
At most 2 WPlugged in and idle, before a wash or flush is activated.
Splash protection
IPX4
During power cuts
Supplied AA battery box supports flushingCells are sourced locally.