Technical specifications
Aera
Floor-mounted · Tankless electric
For those who
love numbers.
Ceramic & construction
- Overall dimensions (L × W × H)
- 595 × 370 × 480 mmHeight refers to the ceramic body.
- Ceramic glaze
- Antibacterial
- Trapway glazing
- Fully glazed
Material performance
| Ceramic property | I.S.I. requirement | Our value |
|---|---|---|
| Water absorption | 0.50% | <0.20% |
| Breaking strength | 600 kg/cm² | 650–700 kg/cm² |
| Crazing resistanceTest condition: steam pressure of 3.7 kg/cm² for four hours. | No crazing up to two cycles | No crazing up to four cycles |
| Minimum thickness | 6 mm at any place | 7 mm at any place |
| Warpage | Should not exceed the specified limits | Within permissible limits |
| Minimum glaze thickness | Not specified | 400 microns / 0.4 mm |
| Surface quality | No wavy finish on the visible surface | No wavy finish |
| Discolouration | None on the visible surface | None on the visible surface |
| Chemical resistance | Should be resistant to all household chemicals | Passes |
| Stain and burn resistance | No stain should remain on testing | Passes |
Plumbing & installation
- Mounting
- Floor-mounted, one-piece tankless ceramic
- Outlet
- S-trap · floor outlet
- Rough-in
- 220 mm
- Seat height
- 465 mmFrom finished floor to seat top.
- Water inlet
- 1/2 in (G1/2, DN15)Angle-valve inlet with hose.
- Minimum water pressure
- 0.14 MPa at the WC point
- Required flow
- Greater than 18 L/minCheck both pressure and delivered flow at the WC point.
- Flush system
- Siphonic dual flush
- Flush volume
- 2.8 L half / 4.6 L full
Electrical & power
- Power supply
- 220 V · 50 Hz
- Rated input
- 1250 W
- Socket provision
- Earthed 15 A socketAt least 300 mm above finished floor.
- Standby consumption
- At most 2 WPlugged in and idle, before a wash or flush is activated.
- Splash protection
- IPX4
- During power cuts
- AA battery box supports flushingCells are sourced locally.